YOU MAY ALSO BE INTERESTED IN…
6110M Tractor
- 122 hp (90 kW) max power (ECE-R120) + 13 hp (9 kW) IPM
- 4.5 l engine with 4 cylinders
- 5.7 t and 2,400 m wheelbase
6M Series: Expect More
Compact build, agile performance
Mowing, tedding, baling and feeding – the daily jobs of a livestock operation become quick work with these machines. Their short wheelbase also make them perfect for front loader work.
Features
Collapse All
Expand All
Improved operator experience inside updated cab
Updated cab
Your 6M workspace is all about intuitive and straightforward tractor operation. Guided by best-practice ergonomic principles, the design of the 6M Tractor's right-hand console and the compact CommandARM™ console is perfectly aligned with the updated cornerpost display in the A-post. It’s a smoothly productive operator experience that is enclosed by more glass all around for a wide-open, unencumbered view.
Bright and long-lasting illumination with lighting packages
Illumination
Factory-installed lighting packages deliver a wide, bright, and concentrated field of light all around your 6M Tractor. For even more demanding lighting requirements, you’ll want to opt for the light-emitting diode (LED) lighting packages which consume less power, provide an even brighter daylight-quality light, and last longer.
Performance boost from high-powered engines
The higher power output of the 6-cylinder engine comes from refined high-pressure common rail (HPCR) technology with injection pressure of up to 2,500 bar (36,259.4 psi). The PVS engine in the 6155M, 6175M, and 6195M Tractors has a variable geometry turbocharger (VGT) that boosts performance and efficiency across the torque curve.
Outstanding efficiency and power with transmission portfolio
Our proven transmission portfolio combines superior ease of operation and convenience with outstanding efficiency to complement the power and torque of your 6M Tractor. For the 6090M through 6155M models, a creeper option with speeds as low as 72 m/hr (0.05 mph) at 1,000 rpm is available.
AutoPowrâ„¢ transmission
For the 6090M through 6140M models, AutoPowr transmission is available. It delivers 100 percent mechanical power at the following working speeds: 3 km/h (1.9 mph) for heavy draft, 9 km/h (5.6 mph) for light draft, 18.5 km/h (11.5 mph) for heavy transport, and 38 km/h (23.6 mph) for light transport. This results in superb transmission efficiency, close to that of mechanical transmissions. In fact, AutoPowr is always using more than 60 percent of the available mechanical power.
PowrQuadâ„¢ Plus transmission
Three versions are available: 16F/16R, 20F/20R, and 24F/24R. All provide rapid shifting including speed matching for smooth shifting between ranges. They are operated by a single range lever with declutch function and push-button gear selection. SoftShift technology keeps the changes smooth, even under load.
AutoQuadâ„¢ Plus transmission
The AutoQuad Plus transmisison provides all the benefits of PowrQuad Plus with the added convenience of automatic gear shifting. 20F/20R and 24F/24R versions are available. The EcoShift option combines high transport speed (40 km/h [24.9 mph]) and low engine rpm between 1,580 and 1,680 to reduce fuel consumption and emissions by up to 23 percent.
CommandQuadâ„¢ Plus transmission
Looking for that extra level of operational ease? Say hello to a lot less clutching and experience less tiresome, more productive days in the cab. You’ll love the enhanced automatic capabilities of CommandQuad Plus.
Comfort and stability from the frame and optional suspension systems
Comfort and stability
The John Deere full-frame design is a solid platform that absorbs and resists loads and shocks from the wheels, heavy implements, and front loaders. To further minimize the fatigue and stress caused by unpleasant vibrations, 6M Tractors can be specified with optional mechanical cab suspension. The standard front axle delivers superior on-road handling, and Triple Link Suspension (TLSâ„¢) is optionally available.
Fuel efficiency and machine performance with hydraulic system
Hydraulics
Easily controlled via the cornerpost display, the pressure-and-flow compensated system (PFC) of the 6M Tractors will produce a powerful flow of up 114 L/min (30.1-gpm). The system automatically enters a no-flow standby mode that improves fuel efficiency, implement performance, and steering response. For operations with less demanding tasks, a cost effective and more basic pressure compensated system (PC) with 80-L/min (21.1-gpm) flow is also available.
The selective control valve (SCV) stack groups together up to four SCVs, power beyond couplers, and the pressure-free return circuit valve, with hydraulic flow easily adjusted from the cornerpost display.
Match the tractor axle to the operation
Axles
Depending on the tread adjustment requirements of the jobs you mostly work on with your tractor, you can choose between flange axles or rack-and-pinion axles on your 6M Tractor.
Accessories and Attachments
Collapse All
Expand All
Ag Management Solutions
ITEC (Headland Management) - BL15231
Display
Bracket for Monitor - BL15158
This heavy-duty bracket allows the installation of additional monitors, control boxes, or other accessories. The bracket is mounted on the right-hand side and can be easily reached from the operator’s seat.
Front Axle
Pressure Accumulator, 1.0 L - For Low Temperature Use - BL15181
Pressure Accumulator, 1.0 L - For Low Temperature Use - BL15202
Tractors | BL15180 | BL15181 | BL15201 | BL15202 |
6130 to 6430 | 3 | |||
6230 Premium to 6430 Premium | 1 | 2 | ||
6530 to 6930, 7130 to 7530 | 2 | 1 | ||
6530 Premium to 6930 Premium, 7130 Premium to 7530 Premium | 3 | |||
6105M to 6125M | 1 | 2 | ||
6105R to 6125R | 1 | 2 | ||
6130M to 6170M | 1 | 2 | ||
6130R to 6150R | 1 | 2 | ||
6170R to 6210R | 3 |
Low Temperature Attachment For TLS - BL15201
NOTE: The field kits have to be ordered as follows: two pressure accumulators are needed on the piston side and one pressure accumulator on the annular chamber side.
Tractors | BL15180 | BL15181 | BL15201 | BL15202 |
6130 to 6430 | 3 | |||
6230 Premium to 6430 Premium | 1 | 2 | ||
6530 to 6930, 7130 to 7530 | 2 | 1 | ||
6530 Premium to 6930 Premium, 7130 Premium to 7530 Premium | 3 | |||
6105M to 6125M | 1 | 2 | ||
6105R to 6125R | 1 | 2 | ||
6130M to 6170M | 1 | 2 | ||
6130R to 6150R | 1 | 2 | ||
6170R to 6210R | 3 |
Hub Extension 60mm, Front, Tread Adjustment - AL156778
Rear Axle
Hub Extension 111mm, Rear, Tread Adjustment - AL156777
Rear axle extensions are available to match different tread settings.
Benefits:
- Optimal track width for vegetables or crop growing
- Easy installation of the track extension
- Less setup time
Hub Extension 30mm, Rear, Tread Adjustment - AL156776
Rear axle extensions are available to match different tread settings.
Benefits:
- Optimal track width for vegetables or crop growing
- Easy installation of the track extension
- Less setup time
Hub Extension 44mm, Rear, Tread Adjustment - AL156779
Battery
Battery Splash Guard - BL15720
Electrical Equipment
Automatic Battery Cut-Off System - BL15659
Multi Socket Strip Right Door - AL174215
3-Terminal Power Outlet Socket - AL203918
Parts for Radar Sensor - BL15726
Multiple Socket Strap with 7 Pin Signal Socket - BL15910
Lighting
Beacon Light, on Left or Right Side of Cab Roof - BL15716
1 Work Light HB3, On Beacon Light Bracket - AL205916
Extrimity Light With Warning Signs - AL169786
Extrimity Light Without Warning Signs - AL164386
Hood Corner Work Lights - BL15257
2 Work Lights H3, Cab Roof Mounted Front - BL15169
2 Work Lights HB3, Beltline Mounted (Upright Position) - BL15174
1 Work Light H3, Fender Mounted Rear, Lh or RH, ECE - AL179973
2 Headlights H4, Beltline Mounted (Upright Position) - AL205881
2 Headlights H4, Beltline Mounted (Upright Position) - BL15035
2 Work Lights H3, Cab Roof Mounted Rear - BL15170
Cold Start Packages
Cold Start Package I, Engine only - BL15430
Cold Start Package II, 230V, 4 Cyl. (Engine, Transmission, - BL15548
Cold Start Package II, 230V, 4 Cyl. (Engine, Transmission, - BL15426
DEF-Tank Filler Neck Heater - BL15538
Fuel Heating Device - BL15539
Fuel Preheater - AL158520
Exhaust
Stainless Steel Exhaust - BL16174
Fuel Tank
Bottom Guard, Fuel Tank - BL15550
Coupling Balls
Guide Ball Holder, CAT 2 - AL179161
Guide Ball Holder, CAT 3 - AL180047
Draft Link
Lift Cylinder For Increased Lift Capacity (75 mm) - BL15610
Drawbar
Drawbar For JD Pick Up Hitch, CAT. 2 - BL16023
Swinging Drawbar with Hammer Strap - BL15978
Drawbar for JD Pick Up Hitch, Cat. 2 - AL157346
Drawbar for JD Pick Up Hitch, Cat. 2 - BL15051
Swinging Drawbar With Hammer Strap - BL15699
Front Hitch
Front Hitch Standard, CAT.3 N, 40KN - BL15891
Front Hitch Standard, Cat.3 N, 40KN - BL15773
Oil Lines, Front Hitch - BL16071
2 Add. SCV Couplers for Front Hitch - BL16072
Mounting Parts - BL15153
Mounting Parts - BL15154
Oil Lines, Front Hitch - BL15661
2 Add. SCV Couplers For Front Hitch - BL15665
Front Hitch Equipment
Hood Guard for Tractors with Front Loader and Front Hitch - BL15808
Mower Chain and Holder, Front 3-Point Hitch - BL15992
Hood Guard - BL15839
Holder For Mower Chains - BL15838
Multivalve for Front-Hitch, 3 Function (closed, double - BL16388
Rear Hitch Equipment
Holder For Hitch Cable (Rope) - AL81619
Mechanical Center Link For Front Hitch Field Installation - BL15055
Hydaulic Center Link, CAT. 2 For Front Hitch - BL15077
Center Link CAT.2, Hook Type - BL15134
Remote Switch, 3-Point-Hitch, Fender Mounted, RH and LH - AL180493
Pick-up Hitch
Pick Up Hitch - BL15969
Piton Fix Insert for Wagon Hitch 3 in 1 - BL15987
Insert, Ball Type For Pick-Up Hitch - BL16025
Wagon Hitch For 290mm Rail, Height Adjustable, Piton Type - BL15989
Piton Fix Insert Slider For 3-In-1 Rail - AL207159
Insert, Ball Type For Pick-Up Hitch - BL15152
Ball-Type Insert Slider For 3-In-1 Rail - AL177175
3-In-1 Rail With Ball-Type Insert Slider - AL177173
3-In-1 Rail With Piton Fix Insert Slider - AL207158
Stabilizer
Automatic Sway Control Bar with Dashpot - AL206324
Wagon Hitch
Forced Steering System, LH and RH, 3t - AL176727
Forced Steering System, RH, 3t - AL176728
Forced Steering System, LH, 3t - AL205398
Forced Steering System, LH and RH - AL176729
Forced Steering System, RH - AL176730
Forced Steering System, LH - AL205400
Wagon Hitch for 290mm Rail, Height Adjustable, Piton Type - BL15959
Wagon Hitch for 290mm Rail, Height Adj., Ball Type 50mm - BL15962
Wagon Hitch for 290mm Rail, Height Adjustable, Ball Type, - BL15960
Lower Hitch 3 in 1 - BL15947
Piton Fix Wagon Hitch For 290mm Rail - AL207418
Ball-Type Wagon Hitch For 290mm Rail - BL15507
Ball-Type Wagon Hitch For 290mm Rail - AL176726
Manual Wagon Hitch, Cuna (Type D3) - AL205151
Forced Steering System, LH and RH - BL16152
Forced Steering System, RH - BL16153
Forced Steering System, LH - BL16154
Wagon Hitch For 290mm Rail, Ball Type - BL15985
Ball Type Insert For Wagon Hitch 3 in 1 - BL16155
Selective Control Valves
Additional Hydraulic Oil Reservoir 14L - BL15216
Midstack Valve, 2 Function - BL15634
Midstack Valve, 3 Function - BL15635
Multi-Function Lever For 2 M-ICV. - BL15311
El. Midstack Valve, 2 Function - BL15951
El. Midstack Valve, 3 Function - BL15952
E-ICV Joystick - BL15918
Electrical Parts for el. Midstack Valve - BL15927
Oil Lines, ICV - BL15995
Oil Lines, ICV - BL15996
Oil Lines, ICV - BL15997
M-ICV Upgrade Kit From 2 To 3 Section - BL15251
Upgrade kit for M-ICV (from two- to three-section design)
El. Midstack Upgrade Kit from 2 to 3 Valve Sections - BL15944
Power Beyond without External Pressure Free Return - BL15674
Power Beyond with External Pressure Free Return - BL15739
External Pressure Free Return without Power Beyond - BL15740
ISO-A Coupler for Power Beyond - BL15738
Oil Return Coupler - BL15735
Oil Return Coupler - BL15672
ISO-A Coupler for Power Beyond - BL15737
Oil Return Coupler - BL15673
Flat-Face Coupler for Power Beyond - BL15736
Oil Return Coupler - BL15671
M-SCV, 200 or 450 Series Pos. 3 - BL15682
M-SCV, 200 or 450 Series Pos. 4 - BL15683
Power Beyond Coupler - Male, Size 12.5 mm (1/2") - AL176806
Power Beyond Coupler - Male, Size 20 mm (3/4") - AL176807
Implement Side, Flat Face Coupler PB, Size 20, ISO 16028 - BL15812
Flat-face coupler for implement, power beyond, size 20, ISO 16028
Implement Side, Flat Face Coupler Drain Case, Size 10, ISO - BL15813
Flat-face coupler for implement, drain case, size 10, ISO 16028
Lever M-SCV, 2 Function - BL15802
Lever, M-SCV, 200 or 450 Series Pos. 3 - AL214392
Multi-Function Lever For 3 M-ICV. - BL15312
Midstack Valve, 2 Function - BL15929
Midstack Valve, 3 Function - BL15930
Oil Lines, ICV - BL15931
Oil Lines, ICV - BL15932
Oil Lines, ICV - BL15933
Reconfigurable Control Modules - BL16213
Miscellaneous
Tool Box - AL204829
Security Door Lock Kit - AL71345
Lockable Fuel Tank - AL113087
Latch, Vandal-Kit, Transmission Oil Filler Neck - BL15869
Lockable Filler Cap Fuel Tank - AL213203
Lockable Filler Cap DEF-Tank - AL211572
Locking the DEF tank with an individual key provides security against vandalism.
Benefits:
- Protection against vandalism and fuel theft
- Individual key system (different from ignition key)
Water Separator - BL15785
Cab Equipment
Field office without beverage holder - AL178985
Immobilizer System - AL205900
Additional Key For Immobilizer System - AL208774
Tablet Mount Kit - BRE10255
Rear Mirror Mechanical - AL80127
Rear Mirror Mechanical - AL80126
JD-Logo for Rear Window - BL15295
This John Deere decal is located at the top of the rear window and reduces glare from direct sunlight. The decal does not affect rear visibility
Rear Window Wiper - BL16028
Sun Visor - AL157620
Sun Shade - BL15198
Inner Rear View Mirror - BL16005
Additional Inside Rear View Mirror, Rear Installation - AL151224
The additional rearview mirror is installed on the right-hand side of the rear window (in direction of travel). When the rear window is open, the mirror provides an excellent view to the hitch, drawbar, and rear-end attachments.
Benefit:
- Provides an excellent view to swinging drawbar and attachments
- Is adjustable to the needs of any operator
Rear Window Wiper - BL15629
Leather wrapped Steering Wheel - BL16358
Heater and Air Conditioning
Activated Carbon Filter - AL158986
Cab air filters with activated carbon media are available for field installation. The filter kit includes two activated carbon air filters (left and right hand) and two activated carbon recirculation air filters, installation instructions, and safety information. These filters are a combination dust-and-odour filter in one, providing high efficiency and performance without air flow restriction in the cab.
Benefit:
- Less irritation of eyes, nose, and throat
- A cleaner cab
- Improves operator working environment